Eductor « MIXY-EDUCTOR »
Eductor “MIXY-EDUCTOR” with control valve, system bypass and suction adjustment from 0 to 6%. Different models are available with flow rates of 200, 400 and 800 lpm as well as various possible connections.
Product Description
The MIXY EDUCTOR operates according to the Venturi principle : as the pressurized water passes through the tip of the convergent pipe, a suction effect is created and the foam concentrated liquid is drawn up. The eductor is fitted with a non-return valve with a polyethylene ball valve, which prevents water from flowing back into the emulsifier tank. The metering orifice regulates the concentration flow and thus determines the percentage of the foam liquid from 0% to 6%. The control valve allows a constant dosage while pressure varies.
Different models are available with flow rates from 200 to 800 lpm (with a pressure loss of 35%) as well as various possible connections (threaded BSP or standardised couplings).
Features
- Flow (according to the model)* :
- 200L/min, 60 GPM
- 400L/min, 125 GPM
- 800L/min, 250 GPM
- Inlet and outlet* :
- Male thread BSP 2″
- Male thread BSP 2″1/2
- DSP DN40
- DSP DN65
- Storz C/52
- Storz B/75
- Operating pressure 10 bar, 140 psi
- Pressure regulated valve
- Non-return valve
- Suction percentage adjustment : 0 – 1% – 2% – 3% – 4% – 5% – 6%
- Delivered with pick-up tube
- Support legs
- Made of aluminium alloy with red polyester coating.
Dimensions : see summary table in the tab « help for choosing ».
Weight : see summary table in the tab « help for choosing ».
*(at choice, see summary table in the tab « help for choosing »)
